-------------------------------------------------------------------
**********************
Air Conditioning
**********************
Save circulation settings
• active
• not active
Circulation settings are saved for next start of the vehicle. (codable in IHKA)
Air conditioning engine speed
• active
• not active
Increase idle engine speed when air conditioning is turned on. (codable in IHKA)
Automatic-mode’ on ignition Key 1
• active
• not active
When turning the ignition on, the AC is automatically set to ‘auto-mode’. Separate setting for key 1. (codable in IHKA)
Automatic-mode’ on ignition Key 2
• active
• not active
When turning the ignition on, the AC is automatically set to ‘auto-mode’. Separate setting for key 2. (codable in IHKA)
Automatic-mode’ on ignition Key 3
• active
• not active
When turning the ignition on, the AC is automatically set to ‘auto-mode’. Separate setting for key 3. (codable in IHKA)
Automatic-mode’ on ignition Key 4
• active
• not active
When turning the ignition on, the AC is automatically set to ‘auto-mode’. Separate setting for key 4. (codable in IHKA)
Turn A/C on after ignition Key 1
• active
• not active
Air conditioning is turned on, after ignition is activated with key 1. (codable in IHKA)
Turn A/C on after ignition Key 2
• active
• not active
Air conditioning is turned on, after ignition is activated with key 2. (codable in IHKA)
Turn A/C on after ignition Key 3
• active
• not active
Air conditioning is turned on, after ignition is activated with key 3. (codable in IHKA)
Turn A/C on after ignition Key 4
• active
• not active
Air conditioning is turned on, after ignition is activated with key 4. (codable in IHKA)
Off-Mode Memory
• active
• not active
Save setting for ‘Off-mode’ for the air conditioning. (codable in IHKA)
**********************
Alarm System
**********************
Panic alarm with remote
• active
• not active
Press and hold the ‘unlock trunk’ button to trigger the alarm. To activate this function, also activate ‘Panic alarm’ in the DWA module. (codable in CAS)
Arm/Disarm Anti-Theft Alarm System
• Only with remote
• With locks and remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote. (codable in CAS)
Panic alarm
• active
• not active
Trigger alarm by pressing and holding the ‘unlock tailgate’ button on the remote. To activate this function also activate ‘Panic alarm with remote’ in the CAS module. (codable in DWA)
Audible confirmation – locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Audible confirmation – unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Alarm with dimmed headlights
• active
• not active
Dimmed headlights blink when alarm is initiated. (codable in DWA)
Alarm with high beams
• active
• not active
High beams blink when alarm is initiated. (codable in DWA)
Alarm with warning lights
• active
• not active
Warning lights blink when alarm is initiated. (codable in DWA)
Alarm type
• Europe
• USA
• UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in DWAS)
**********************
Angel Eyes
**********************
Daytime running lights – angel eyes
• active
• not active
Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’ and ‘Daytime running lights – customization’ to ‘Only additional lights’. If you want to increase the brightness, please use ’Daytime running lights – angel eyes brightness’. (codable in LMA)
Daytime running lights – angel eyes brightness
• off
• very low
• low
• medium
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. (codable in LMA)
Daytime running lights – angel eyes brightness (alternative)
• off
• very low
• low
• rather low
• rather high
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. Use this function, if ‘Daytime running lights – angel eyes brightness’ does not show any effect. (codable in LMA)
**********************
Brake lights
**********************
Brake force display
• active
• not active
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. (codable in LMA)
Brake force display – tail lights
• on
• flashing
Customization for tail lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LMA)
Brake force display – angel eyes
• off
• on
• flashing
Customization for angel eyes for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LMA)
Brake force display – outer brake lights
• off
• on
• flashing
Customization for outer brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LMA)
Brake force display – inner brake lights
• off
• on
• flashing
Customization for inner brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LMA)
Brake force display – rear fog lights
• off
• on
• flashing
Customization for rear fog lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LMA)
**********************
Comfort Functions
**********************
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort open using keylocks
• active
• not active
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)
Comfort close using keylocks
• active
• not active
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
**********************
Coming Home
**********************
Activate follow me home lights
• active
• not active
Follow me home lights are active/not active. (codable in LMA)
Follow me home lights with remote
• active
• not active
Quickly press the ‘Open trunk’ button twice to activate the follow me home lights. In some circumstances the function ‘Panic mode remote’ in the CAS has to be activated, too. (codable in LMA)
Follow me home lights duration
• off
• 40s
• 90s
• 150s
• 240s
Duration of follow me home lights in seconds. To activate follow me home lights, activate the flash to pass, while the enginge is off. (codable in LMA)
Follow me home lights duration Key 1
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 1. (codable in LMA)
Follow me home lights duration Key 2
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 2. (codable in LMA)
Follow me home lights duration Key 3
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 3. (codable in LMA)
Cancel follow me home lights
• active
• not active
Follow me home lights are cancelled, when activating the flash to pass again. (codable in LMA)
Extend follow me home lights
• active
• not active
Follow me home lights are displayed longer, when activating the flash to pass again. (codable in LMA)
Follow me home lights – dashboard lights
• active
• not active
Follow me home lights for dashboard instruments are active/not active. (codable in LMA)
Follow me home lights – low beams
• active
• not active
Follow me home lights for low beams are active/not active. (codable in LMA)
Follow me home lights – brake lights
• active
• not active
Follow me home lights for brake lights are active/not active. (codable in LMA)
Follow me home lights – turn signals rear
• active
• not active
Follow me home lights for turn signals rear are active/not active. (codable in LMA)
Follow me home lights – turn signals front
• active
• not active
Follow me home lights for turn signals front are active/not active. (codable in LMA)
Follow me home lights – high beams
• active
• not active
Follow me home lights for high beams are active/not active. (codable in LMA)
Follow me home lights – number plates
• active
• not active
Follow me home lights for number plates are active/not active. (codable in LMA)
Follow me home lights – fog lights rear
• active
• not active
Follow me home lights for fog lights rear are active/not active. (codable in LMA)
Follow me home lights – fog lights front
• active
• not active
Follow me home lights for fog lights front are active/not active. (codable in LMA)
Follow me home lights – reversing lights
• active
• not active
Follow me home lights for reversing lights are active/not active. (codable in LMA)
Follow me home lights – tail lights
• active
• not active
Follow me home lights for tail lights are active/not active. (codable in LMA)
Follow me home lights – inner tail lights
• active
• not active
Follow me home lights for inner tail lights are active/not active. (codable in LMA)
Follow me home lights – park lights
• active
• not active
Follow me home lights for parking lights are active/not active. (codable in LMA)
**********************
Cornering Lights
**********************
Cornering lights 1/3
• active
• not active
Use front fog lights/high beams as cornering lights. Also, this function often requires adaptive headlights to be installed. (codable in LMA)
Cornering lights 2/3
• active
• not active
Only change this function with ‘Cornering lights 1/3’. Also, this function often requires adaptive headlights to be installed. (codable in LMA)
Cornering lights 3/3
• active
• not active
Only change this function with ‘Cornering lights 1/3’. Also, this function often requires adaptive headlights to be installed. (codable in LMA)
Cornering lights – reverse gear
• active
• not active
Use cornering lights also when reversing. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
Cornering lights – brightness
• off
• very low
• low
• medium
• high
• very high
Brightness of ‘Cornering lights’. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
Cornering lights – key 1
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 1. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
Cornering lights – key 2
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 2. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
Cornering lights – key 3
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 3. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
Cornering lights – key 4
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 4. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
**********************
Daytime Running Lights
**********************
Daytime running lights 1/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 2/2’ as well. (codable in LMA)
Daytime running lights 2/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 1/2’ as well. (codable in LMA)
Daytime running lights – Key 1
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 1. (codable in LMA)
Daytime running lights – Key 2
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 2. (codable in LMA)
Daytime running lights – Key 3
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 3. (codable in LMA)
Daytime running lights customization
• not active
• dimmed turn signals
• dimmed high beams
Customization of the daytime running lights. Brightness can be set with ‘Daytime running lights brightness’. (codable in LMA)
Daytime running lights brightness
• low
• medium
• high
Brightness for dimmed daytime running lights. To use this function, also activate ‘Daytime running lights customization’. (codable in LMA)
Daytime running lights – customization
• Off
• Low beams
• High beams
• Only additional lights (EU models)
• Only additional lights (US models)
Customization of the daytime running lights (DRL). The DRL is activated when the light switch is set to position ‘0’ in the car. (codable in LMA)
Daytime running lights – high beams brightness
• very low
• low
• medium
• high
Brightness of high beams for daytime running lights. To activate the high beams for daytime running lights, set ‘Daytime running lights – customization’ to ‘High beams’. (codable in LMA)
Daytime running lights – eyebrows
• active
• not active
Use eyebrows as daytime running lights. (codable in LMA)
Daytime running lights – front turn signals
• active
• not active
Use front turn signals as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – turn signals brightness
• off
• low
• medium
• high
Brightness for ‘Daytime running lights – front turn signals’. (codable in LMA)
Daytime running lights – angel eyes
• active
• not active
Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’ and ‘Daytime running lights – customization’ to ‘Only additional lights’. If you want to increase the brightness, please use ’Daytime running lights – angel eyes brightness’. (codable in LMA)
Daytime running lights – angel eyes brightness
• off
• very low
• low
• medium
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. (codable in LMA)
Daytime running lights – angel eyes brightness (alternative)
• off
• very low
• low
• rather low
• rather high
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. Use this function, if ‘Daytime running lights – angel eyes brightness’ does not show any effect. (codable in LMA)
Daytime running lights – number plate lighting
• active
• not active
Use number plate lighting as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – tail lights
• active
• not active
Use tail lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – outer brake lights
• active
• not active
Use outer brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – inner brake lights
• active
• not active
Use inner brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
**********************
Flash to Pass
**********************
Flash to pass with bi-xenon
• active
• not active
Bi-xenon lamps are used for flash to pass. (codable in LMA)
Front fog lights with flash to pass
• active
• not active
Front fog lights are automatically turned off when activating flash to pass. (codable in LMA)
**********************
High Beam
**********************
Front fog lights with high beams
• active
• not active
Front fog lights are automatically turned off when activating high beams. (codable in LMA)
**********************
Instrument Cluster
**********************
Digital speedometer
• active
• not active
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)
Correction’ analog speedometer
• active
• not active
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
**********************
Interior Lights
**********************
Interior lights with remote
• active
• not active
Pressing the lock button on the remote, when the car is already locked, turns on the interior lights. (codable in CAS)
**********************
Locking
**********************
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort close using keylocks
• active
• not active
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
Lock tailgate when car locked
• active
• not active
Tailgate cannot be unlocked, when car is locked. (codable in CAS)
Automatically lock vehicle duration
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes until doors are locked after car was unlocked but no windows or doors have been opened. (codable in CAS)
Automatically lock vehicle Key 1
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 1nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Automatically lock vehicle Key 2
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 2nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Automatically lock vehicle Key 3
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 3nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Automatically lock vehicle Key 4
• active
• not active
Separate setting for ‘Automatically lock vehicle’ for key 4nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)
Lock vehicle upon ignition
• active
• not active
Vehicle is locked, when ignition is turned on. (codable in CAS)
Threshold speed for vehicle locking
• 2 kph / 1 mph
• 6 kph / 4 mph
• 12 kph / 8 mph
• 18 kph / 11 mph
• 24 kph / 15 mph
• 30 kph / 19 mph
Sets the speed at which the vehicle automatically locks all doors.nTo activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in CAS)
Lock vehicle at x kph Key 1
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 1 is used. (codable in CAS)
Lock vehicle at x kph Key 2
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 2 is used. (codable in CAS)
Lock vehicle at x kph Key 3
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 3 is used. (codable in CAS)
Lock vehicle at x kph Key 4
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 4 is used. (codable in CAS)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. (codable in LMA)
Optical confirmation lock vehicle Key 1
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 1. (codable in LMA)
Optical confirmation lock vehicle Key 2
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 2. (codable in LMA)
Optical confirmation lock vehicle Key 3
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 3. (codable in LMA)
Audible confirmation – locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
**********************
Opening
**********************
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Comfort open using keylocks
• active
• not active
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 1
• active
• not active
Separate setting for ‘Selective central locking’ for key 1nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 2
• active
• not active
Separate setting for ‘Selective central locking’ for key 2nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 3
• active
• not active
Separate setting for ‘Selective central locking’ for key 3nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 4
• active
• not active
Separate setting for ‘Selective central locking’ for key 4nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking – unlock fuel lid
• active
• not active
The fuel lid is also unlocked upon the first unlock, when ‘Selective central locking’ is active. (codable in CAS)
Unlock car when turned off
• active
• not active
Doors are automatically unlocked, when ignition key is ejected. Only works if ‘Lock vehicle at x kph Key 1-4’ is activated. (codable in CAS)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. (codable in LMA)
Optical confirmation unlock vehicle Key 1
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 1. (codable in LMA)
Optical confirmation unlock vehicle Key 2
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 2. (codable in LMA)
Optical confirmation unlock vehicle Key 3
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 3. (codable in LMA)
Audible confirmation – unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
**********************
Parking Light
**********************
Comfort standing light
• active
• not active
If the light switch is set at automatic or on, the parking lights remain on, until the vehicle is locked with the remote. (codable in LMA)
**********************
Power Windows
**********************
Power windows after ignition off
• active
• not active
Power windows are active for another minute after ignition is turned off. (codable in CAS)
Power windows after ignition off
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes, for which power windows are active after turning off the ignition. (codable in CAS)
**********************
Speedometer
**********************
Digital speedometer
• active
• not active
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)
Correction’ analog speedometer
• active
• not active
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
**********************
Tail gate/Rear lid
**********************
Close trunk with footwell switch
• active
• not active
Close the trunk/rear lid with the interior footwell switch. (codable in HKL)
Close trunk with keyfob
• active
• not active
Close the trunk/rear lid via the keyfob. To activate this function also deactivate ‘Panic alarm with remote’ in the CAS module. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL)
**********************
Turn signals
**********************
Hazard lights
• standard
• double
Hazard lights blink once or twice. (codable in LMA)
Crash lights
• standard
• double
Hazard lights blink once or twice upon an accident. (codable in LMA)
One-touch turn signal function
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. If available, please activate this option for the different keys as well. In some cases, this option also needs to be enabled in the iDrive. (codable in LMA)
One-touch turn signal function Key 1
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 1. (codable in LMA)
One-touch turn signal function Key 2
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 2. (codable in LMA)
One-touch turn signal function Key 3
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 3. (codable in LMA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. (codable in LMA)
Optical confirmation lock vehicle Key 1
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 1. (codable in LMA)
Optical confirmation lock vehicle Key 2
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 2. (codable in LMA)
Optical confirmation lock vehicle Key 3
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 3. (codable in LMA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. (codable in LMA)
Optical confirmation unlock vehicle Key 1
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 1. (codable in LMA)
Optical confirmation unlock vehicle Key 2
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 2. (codable in LMA)
Optical confirmation unlock vehicle Key 3
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 3. (codable in LMA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
**********************
Voltage Monitoring
**********************
Angel Eyes voltage monit. 1/2
• active
• not active
Voltage monitoring for angel eyes. Might cause flickering of LED lights. (codable in LMA)
Angel Eyes voltage monit. 2/2
• active
• not active
Deactivate with ‘Angel Eyes voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Sidemarker voltage monit. 1/2
• active
• not active
Voltage monitoring for sidemarkers. Might cause flickering of LED lights. (codable in LMA)
Sidemarker voltage monit. 2/2
• active
• not active
Deactivate with ‘Sidemarker voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Turn signals front voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (codable in LMA)
Turn signals front voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for fog lights. Might cause flickering of LED lights. (codable in LMA)
Fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Fog lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
High beams voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (codable in LMA)
High beams voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Low beams voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (codable in LMA)
Low beams voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Turn signals rear voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (codable in LMA)
Turn signals rear voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Braking lights voltage monit. 1/2
• active
• not active
Voltage monitoring for braking lights. Might cause flickering of LED lights. (codable in LMA)
Braking lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Braking lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Third brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in LMA)
Third brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Tail lights voltage monit. 1/2
• active
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (codable in LMA)
Tail lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Tail lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Reversing lights voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights. Might cause flickering of LED lights. (codable in LMA)
Reversing lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
License plate lighting voltage monit. 1/2
• active
• not active
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in LMA)
License plate lighting voltage monit. 2/2
• active
• not active
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Rear fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (codable in LMA)
Rear fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Rear fog light left voltage monit. 1/2
• active
• not active
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in LMA)
Rear fog light left voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
Rear fog light right voltage monit. 1/2
• active
• not active
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in LMA)
Rear fog light right voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in LMA)
**********************
Warnings
**********************
Lights-on warning
• active
• not active
A warning is shown, when the driver’s door is opened while the lights are still on. (codable in LMA)
Angel Eyes/standing lights warning
• active
• not active
Warning for malfunction of angel eyes and the front standing lights in the on board computer. (codable in LMA)
Daytime running lights warning
• active
• not active
Warning for malfunction of daytime running lights and angel eyes in the on board computer. (codable in LMA)
Sidemarker warning
• active
• not active
Warning for malfunction of sidemarker in the on board computer. (codable in LMA)
Turn signals front warning
• active
• not active
Warning for malfunction of front turn signals in the on board computer. (codable in LMA)
Fog lights front warning
• active
• not active
Warning for malfunction of front fog lights in the on board computer. (codable in LMA)
High beams warning
• active
• not active
Warning for malfunction of high beams in the on board computer. (codable in LMA)
Low beams warning
• active
• not active
Warning for malfunction of low beams in the on board computer. (codable in LMA)
Turn signals rear warning
• active
• not active
Warning for malfunction of rear turn signals in the on board computer. (codable in LMA)
Outer brake lights warning
• active
• not active
Warning for malfunction of outer braking lights in the on board computer. (codable in LMA)
Third brake light warning
• active
• not active
Warning for malfunction of third brake light in the on board computer. (codable in LMA)
Tail lights warning
• active
• not active
Warning for malfunction of tail lights in the on board computer. (codable in LMA)
Reversing lights warning
• active
• not active
Warning for malfunction of reversing lights in the on board computer. (codable in LMA)
License plate light warning
• active
• not active
Warning for malfunction of license plate lights in the on board computer. (codable in LMA)
Rear fog light left warning
• active
• not active
Warning for malfunction of rear left fog light in the on board computer. (codable in LMA)
Rear fog light right warning
• active
• not active
Warning for malfunction of rear right fog light in the on board computer. (codable in LMA)
Eyebrow lights warning
• active
• not active
Warning for malfunction of eyebrow lights in the on board computer. (codable in LMA)
**********************
Welcome Light
**********************
Welcome lights
• active
• not active
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in LMA)
Welcome lights Key 1
• active
• not active
Separate setting for ‘Welcome lights’ for key 1. (codable in LMA)
Welcome lights Key 2
• active
• not active
Separate setting for ‘Welcome lights’ for key 2. (codable in LMA)
Welcome lights Key 3
• active
• not active
Separate setting for ‘Welcome lights’ for key 3. (codable in LMA)
Welcome lights Key 4
• active
• not active
Separate setting for ‘Welcome lights’ for key 4. (codable in LMA)
Welcome lights duration
• off
• 5s
• 10s
• 20s
• 40s
• 90s
• 150s
• 240s
Duration of the welcome lights in seconds. (codable in LMA)
Welcome lights – low beams
• not active
• turn on softly
• turn on hard
Low beams are turned on with welcome lights. (codable in LMA)
Welcome lights – braking lights
• not active
• turn on softly
• turn on hard
Braking lights are turned on with welcome lights. (codable in LMA)
Welcome lights – turn signals front
• not active
• turn on softly
• turn on hard
Turn signals front are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in LMA)
Welcome lights – turn signals rear
• not active
• turn on softly
• turn on hard
Turn signals rear are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in LMA)
Welcome lights – high beams
• not active
• turn on softly
• turn on hard
High beams are turned on with welcome lights. (codable in LMA)
Welcome lights – number plate lighting
• not active
• turn on softly
• turn on hard
Number plate lights are turned on with welcome lights. (codable in LMA)
Welcome lights – front fog lights
• not active
• turn on softly
• turn on hard
Front fog lights are turned on with welcome lights. (codable in LMA)
Welcome lights – rear fog lights
• not active
• turn on softly
• turn on hard
Rear fog lights are turned on with welcome lights. (codable in LMA)
Welcome lights – corner LEDs
• not active
• turn on softly
• turn on hard
Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not possible to softly turn them on. (codable in LMA)
Welcome lights – standing lights front
• not active
• turn on softly
• turn on hard
Standing lights front are turned on with welcome lights. (codable in LMA)
Welcome lights – standing lights rear
• not active
• turn on softly
• turn on hard
Standing lights rear are turned on with welcome lights. (codable in LMA)
Welcome lights – eyebrow lights
• not active
• turn on softly
• turn on hard
Eyebrow lights are turned on with welcome lights. (codable in LMA)
**********************
Please see ...
http://support.mycarly.com/knowledge-base/code-bmw-what-is-possible/?utm_source=home&utm_medium=direct&utm_campaign=home
for latest information
**********************
0 件のコメント:
コメントを投稿